Carbide Grit Edge Hole Saws | Tungsten Carbide Grains
Tungsten Carbide Grains
With a tungsten carbide grit edge, it saws holes into brick, cement board, fiberglass, and block to produce round cutouts commonly needed for plumbing.
Features:
- Designed with a tungsten carbide cutting edge
- Cutting depth 1-1/2″
- 3/16″ thick heavy-duty backing plate
- High heat and abrasion resistance makes your project easier
- No teeth to dull or chip
- Cutting into extremely hard abrasive materials is a breeze
- These hole saws resist snagging
- Eliminates the need for a drive plate
Applications:
- Used for plumbing, construction, marine and aircraft applications.
- Recommended cutting laminates, fiberglass, ceramic tile, marble and slate, cast iron and composites.
FRACTIONAL
| DIA. | USE ARBOR TYPE | PIPE TAP SIZE | PIPE ENT. SIZE | STOCK # |
| 3/4″ | 1/2″ | 3/8″ | HOSA76004 | |
| 7/8″ | TYPE E | 3/4″ | 1/2″ | HOSA76006 |
| 1″ | HOSA76061 | HOSA76007 | ||
| 1-1/8″ | 1″ | 3/4″ | HOSA76008 | |
| 1-1/4″ | HOSA76009 | |||
| 1-3/8″ | 1″ | HOSA76010 | ||
| 1-1/2″ | 1-1/4″ | HOSA76011 | ||
| 1-3/4″ | 1-1/2″ | 1-1/4″ | HOSA76012 | |
| 1-7/8″ | HOSA76013 | |||
| 2″ | 1-1/2″ | HOSA76014 | ||
| 2-1/8″ | HOSA76015 | |||
| 2-1/4″ | 2″ | HOSA76016 | ||
| TYPE F | ||||
| 2-3/8″ | HOSA76017 | |||
| 2-1/2″ | HOSA76062 | 2″ | HOSA76018 | |
| 2-3/4″ | HOSA76019 | |||
| 3″ | 2-1/2″ | HOSA76020 | ||
| 3-1/4″ | 3″ | HOSA76021 | ||
| 3-3/8″ | HOSA76022 | |||
| 3-3/4″ | 3-1/2″ | HOSA76023 | ||
| 4″ | HOSA76024 | |||
| 4-1/2″ | 4″ | HOSA76025 | ||
|
RECESSED LIGHTING HOLE SAWS |
||||
| 6-3/8″
6-5/8″ 6-7/8″ |
TYPE F
HOSA7606 2 |
HOSA76040
HOSA76041 HOSA76042 |
||
Carbide Grit® Hole Saw Operating Speeds
| Hole Saw Size | Brick Ceramic | Slate | Reinforced Plastics | Fiber– Glass | |
| Inches | MM | ||||
| 5/8 | 16 | 620 | 1540 | 2140 | 920 |
| 3/4 | 19 | 510 | 1280 | 1790 | 770 |
| – | 20 | 470 | 1180 | 1660 | 715 |
| 7/8 | 22 | 430 | 1090 | 1530 | 660 |
| 1 | 25 | 380 | 960 | 1340 | 580 |
| 1-1/8 | 29 | 340 | 850 | 1190 | 510 |
| 1-1/4 | 32 | 310 | 770 | 1070 | 460 |
| 1-3/8 | 35 | 280 | 700 | 980 | 420 |
| 1-1/2 | 38 | 260 | 640 | 890 | 390 |
| 1-3/4 | 44 | 220 | 550 | 770 | 330 |
| 1-7/8 | 48 | 200 | 510 | 720 | 310 |
| 2 | 51 | 190 | 480 | 670 | 290 |
| Hole Saw Size | Brick Ceramic | Slate | Reinforced Plastics | Fiber– Glass | |
| Inches | MM | ||||
| 2-1/8 | 54 | 180 | 450 | 630 | 280 |
| 2-1/4 | 57 | 170 | 430 | 600 | 270 |
| 2-3/8 | 60 | 160 | 400 | 570 | 250 |
| 2-1/2 | 64 | 150 | 380 | 540 | 230 |
| 2-3/4 | 70 | 140 | 350 | 500 | 210 |
| 3 | 76 | 130 | 320 | 450 | 190 |
| 3-1/4 | 83 | 120 | 295 | 415 | 180 |
| 3-3/8 | 86 | 115 | 285 | 400 | 175 |
| 3-3/4 | 95 | 102 | 255 | 350 | 160 |
| 4 | 102 | 95 | 240 | 330 | 150 |
| 4-1/2 | 114 | 82 | 215 | 290 | 125 |
Frequently Asked Questions About Solid Carbide Drills
What is a Carbide Grit Hole Saw Used for?
Carbide grit hole saws are intended for cutting brick, cement, fiberglass, and other abrasive materials. It is recommended to use a carbide-tipped drill bit for cutting these materials.
What is the Best Hole Saw for Steel?
There are many options online for steel hole saws. It’s best to read up and compare desired features against your budget to find the best hole saw for you.
How Do You Use a Hole Saw for an Existing Hole?
When using a hole saw for an existing hole, you can start by using a hole saw of the same size as the existing hole and then simply cut a plug made from scrap wood to use.
What Are Carbide Drill Bits Used for?
Carbide drill bits are used for creating holes in tough materials such as masonry.
Where Can I Buy Carbide Drill Bits?
There are lots of places you can get drill bits online but Drill Bits USA is without a doubt one of the best suppliers. They have an extensive range of drill bits in many different materials and shapes for whatever use you need them for. At Drill Bits USA, you’ll be able to find carbide drill bits as well as cheaper alternatives and carbide-coated drill bits.
What is a Solid Carbide Drill?
A solid carbide drill provides great precision and penetration for tough materials. They create a good quality cut and are designed to be long-lasting. They are a bit more costly than many other drill bits but the quality of cut and versatility justifies this.
Reviews
There are no reviews yet.