Micrograin Carbide Burrs – Long Shank
Micrograin Carbide Burrs – Long Shank
SHANK DIA. 1/4″ | LENGTH 6″ | SINGLE CUT | DOUBLE CUT
Features:
- Long shank burrs are suitable for all hard to reach work.
- Smaller diameter heads are ideal for small components.
- Large diameter heads are suitable for deep applications, such as engine block work.
- USA Manufactured
These Carbide Burr Drills are also great for drilling through the following materials:
- Brass
- Aluminum
- Metals
- Steel
- Copper
NOTE: When working with long shank burrs, the burr must be in contact with the workpiece (or inserted in the bore or slot to be machined) before the machine is turned on. As a rule, the tool must remain in contact with the workpiece for as long as the machine is running. Failure to observe this procedure may result in shank failure and hence, an increased accident risk.
Frequently Asked Questions About Solid Carbide Drills
What is a Carbide Grit Hole Saw Used for?
Carbide grit hole saws are intended for cutting brick, cement, fiberglass, and other abrasive materials. It is recommended to use a carbide-tipped drill bit for cutting these materials.
What is the Best Hole Saw for Steel?
There are many options online for steel hole saws. It’s best to read up and compare desired features against your budget to find the best hole saw for you.
How Do You Use a Hole Saw for an Existing Hole?
When using a hole saw for an existing hole, you can start by using a hole saw of the same size as the existing hole and then simply cut a plug made from scrap wood to use.
What Are Carbide Drill Bits Used for?
Carbide drill bits are used for creating holes in tough materials such as masonry.
Where Can I Buy Carbide Drill Bits?
There are lots of places you can get drill bits online but Drill Bits USA is without a doubt one of the best suppliers. They have an extensive range of drill bits in many different materials and shapes for whatever use you need them for. At Drill Bits USA, you’ll be able to find carbide drill bits as well as cheaper alternatives and carbide-coated drill bits.
What is a Solid Carbide Drill?
A solid carbide drill provides great precision and penetration for tough materials. They create a good quality cut and are designed to be long-lasting. They are a bit more costly than many other drill bits but the quality of cut and versatility justifies this.
Fill Out the Form Below or Call Us!(407) 385-3511
