One of the best DIY skills any handyman can learn for himself is how to properly sharpen dull and used drill bits. It’s cheaper and far more practical than buying new replacements, so you really ought to learn the following tips.

What is the Best Drill Bit Sharpener?

Drill Doctor is one of the most trustworthy drill bit sharpener brands out there. Their models, like the DD500X or the 750X, are perfect choices to bring back to life any dull drill bit.

Is it Worth Sharpening Drill Bits?

While it may seem like a hassle at first, learning how to sharpen your own drill bits will really pay off in the long run. It will save you cash and it doesn’t take too much time.

How do You Sharpen a Drill Bit by Hand?

As long as you have something like a bench grinder or a belt sander then you can easily sharpen your bits by angling them correctly onto the sharpener. You will need to apply a little bit of pressure as you place the bit onto the device, angle it about 45 degrees from the tip and then shape the landing by rotating it counter-clockwise to create a rounded edge.

What is the Best Way to Sharpen Drill Bits?

The three best ways to sharpen drill bits are to use a bench grinder, a belt sander, or a dedicated drill bit sharpener. You can learn how to sharpen drill bits with a file but this is harder and more time consuming and therefore not recommended as much.

If you still want to learn how to sharpen drill bits without a grinder then you will need to learn how to sharpen drill bits with a file. If you’re wondering what angle do you sharpen drill bits with a file with, it should be around 60 degrees. Run it down the edges a few times while either holding the drill bit tightly or have it clamped down with a vice. This is how you can sharpen drill bits by hand or without a grinder.

Can All Drill Bits be Sharpened?

Yes, all drill bits can be sharpened but it should be noted that some drill bits will sharpen easier than others. Twist drill bits are easiest to sharpen because their design makes it simpler to rotate them in the proper directions as you are sharpening them.

With a little effort, you can sharpen any and all of your drill bits by yourself. Follow the tips above and you won’t ever have to replace them.